Proprietary force multiplier/actuator system

Standard actuator gate operators require placement of pivot points at specific points in reference to the center of the gate hinge.  These standard points did not allow for the post to be placed in the center of a column, hence, all the gates you see with the posts behind the columns.  So, we built it better.

Our system allows us to use an acuator on any swing gate, regardless of column size, post placement within the column, without the use of overly expensive, maintenance prone, articulating arm operators

Key Benefits

• Allows Operator to be installed on any gate/any column, regardless of size.
• Increases life of the operator by reducing Work output 2.36:1
• Improves aesthetics by allowing gates to be mounted in the center of columns, rather than on posts behind the column
• Will allow retrofit applications, where columns are already built.

Send mail to webmaster@gatesmtn.com with questions or comments about this web site.
Copyright © 2007 Direct Design/Build, Inc.
Last modified: 05/13/09